The process of using notebook computers, some factors that make the battery wear and tear. Even the laptop battery maximum using time less than the standard battery life, it not means the battery have some problem in inherent quality and performance. Notebook battery capacity mainly determine by the size of the marked mAh on battery. The size of the laptop battery MA hours directly related to the using time. Battery using time are also have a great relationship with notebook configurations.

Then we list all the specific factors that can affect the Dell WW116 battery life:

Factor 1: the processor speed – install the the right Intel chipset driver will enable the system to use Intel’s Speedstep technology, that can adjust processor speed in application system to extend the battery life.

Factor 2: Reading CD, DVD, CD-RW and hard drive frequently- the CD-ROM copy of the file directly to your hard drive, watch videos, dials and other operations will affect the Latitude D620 Battery life.

Factor 3: the total number of memory- if the system opens a lot of applications will take up a lot of hard disk space to do file-swapping (virtual memory), resulting in frequent hard disk read and write.So increase more memory will increase the battery using time .

Factor 4: Some applications to run automatically in the background, it will increase the CPU load, resulting in reduced Latitude D520 Battery using time – We usually suggest that turn off some background programs in the daily use, only run the necessary applications.

Factor 5: LCD’s brightness – the lower the brightness the longer battery using time if possible. You can use keyboard function keys to adjust the LCD brightness .

Factor 6: Power Management and Speed Step settings – Set the different power scheme in the power management will affect Inspiron 1720 Battery using time.

Factors 7: Battery life – the average battery life is one year, the gradual reduction of battery usage time is normal as the using. We also think it is the battery aging time.

Factors 8: For the processor and system equipment deeper applications (such as watching DVD movies and 3D games) will make the Inspiron 1721 Battery using time quickly reduce.

Factors 9: Wireless devices and Bluetooth devices will accelerate Dell XPS M1730 Battery consumption; When do not need wireless, you can use the keyboard function keys to turn off the wireless and Bluetooth to save power.

Factors 10: The environmental temperature – too high or too low ambient temperature will affect battery core activity of chemical substances, thus reducing the battery using time and life. The factors is happend obviously in Sony battery as Sony VGP-BPS8 VGP-BPS9.

Overall, the laptop battery using time is not only determined by capacity mAh, the hardware energy-saving technology is also very important.

The article Via laptop battery blog

What is rechargeable battery self discharge?Primary Latitude D520 battery or full charged secondary battery, when put aside for a period, it is capacity will decline or lose, this phenomenon calls self discharge that is electricity flee away. It is decided by the inner electro-chemistry system, similar to water leakage from pond or reservoir.

What is battery inner impedance?Battery impedance is the resistance when the current flow through an operating cell, in general the internal resistance is included both d.c. and a.c. resistance. For the rechargeable Latitude D830 battery cell resistance is small and electrode is easy to be polarized along with producing a polarization resistance while measure d.c. resistance, the accurate value can’t be measured.

What is the memory effect?Memory effect only happens on Ni-Cd batteries. As in traditional technology a Ni-Cd Dell XPS M1730 battery’s negative is agglomeration with thick Ni crystal, if Ni-Cd batteries are recharged before they have been fully discharged, Ni crystal easily gathers to form agglomeration, which makes the primary discharge platform come into being. The battery stores the platform, which will be considered as the end of discharge for the next cycle even though the capacity decides that the battery can be discharged to a lower platform. The battery will store this process in its memory so during the next discharge, the battery only remembers this reduced capacity. Similarly any further incomplete discharge in each use will aggravate the effect makes lower capacity. The effect there are two methods to remove the effect: firstly deep discharge at trickle current (i.e. 0.1C to 0V), secondly several cycles at high currents (e.g. 1C).

 Low temperatures (e.g. -15?) will obviously reduce Ni-Cd and Ni-MH ThinkPad T42 battery discharge rate. At -20? electrolyte is at its freezing point, charge speed will greatly slow down. At low temperature (under -15?) charge will raise the internal gas pressure and probably unseal the safety vent. Ambient temperature of 5?to 30? is the best range to get effective charge. Generally with temperature rising charge efficiency will become higher. But when the temperature rises to 45? or higher, the materials performance in the battery will be degenerated and battery service life will be shorten greatly.

What is the Over charge affects the battery performance?The continual charge action after fully charged with certain charge approach is overcharge. the positive capacity is higher than the negative on design, the generated oxygen in positive can composite, through separator, with Cd generated in negative. In general condition the internal pressure will not rise obviously, but if the IBM thinkpad T43 battery charge current is so heavy or the charge time is so long, and the generated oxygen can not be used up in time, there will be some quality defect risen such as internal pressure rising, battery distortion, leakage and so on. Meanwhile its performance will decline.

What is the Over discharge affects the battery performance?If a cell’s voltage reaches a designed value, that means the battery has discharge the stored capacity, but still the discharge action is continual, over-discharge will cause. Commonly the end voltage can be identified through discharge current, for example the end voltage is set at Laptop battery 1.0V/cell as discharged at 0.2C-2C, and 0.8V/cell at 3C or more, e.g. 5C or 10C. Over discharge may cause disaster, especially at heavy current or repeated over discharge. Commonly over discharge can make cell inner pressure raise, and the reversibility of activity materials both in positive and negative will be damaged. Even by charge only part can recover and the capacity is reduced obviously.

What is the short circuit affects the battery performance?Any kinds of conductive material being bridged with the external terminals of a battery will result in short circuit. Based on the laptop batteries system, a short circuit may have serious consequences, e.g. rising electrolyte temperature or building up internal gas pressure. If the internal gas pressure value exceeds the limitation of cell cap endurances, the electrolyte will leak, which will damage battery greatly. If safe vent fails to respond, even explosion will occur. Therefore don’t short circuit.

Trackback: laptop battery blog

Energy conservation is the main theme of today’s electronics manufacturing, various power management chip in this area are playing an increasingly important role. Many countries use administrative means to even legislation to encourage manufacturers to use in their products, energy-saving technologies fujifilm np-150.

A reference to energy-saving, people tend to think of the machine roar of large factories. In fact, the energy consumption of information technology applications on a global scale is also very striking. In this regard, Linear Technology Power Products Division product marketing manager for TongArmstrong In an interview with “China Electronics News” reporter doing an interview with the image of the note: “to distribute hundreds of millions of YouTube videos, and keep the economy fujifilm np-30 running on server power consumption cases between 2000 and 2005, its consumption has doubled, by 2010 there may be further increased by 75%. In 2005, in order to make such as Google, Microsoft and Yahoo and other Internet giants owned by the world’s data centers of the line state, its power consumption is equivalent to 14 one billion watts of total power generating capacity. Only the United States, the power consumed by server farms will require five large power plants in the above-mentioned operating around the clock. In 2005, the U.S. consumption of the server group reached the United States that year the total electricity generating capacity of 1.2%. this part of the energy utilities in the amount of 2.7 billion. can be seen that the United States alone in terms of server farms, energy consumption fell by 1% at this level would mean an annual saving of 27 fujifilm np-40 million U.S. dollars! ”

Fairchild Semiconductor Technology and Application Support Center Wangrui Xing, vice president of Asia-Pacific region also told reporters: “Improving energy efficiency is the main development trends in the semiconductor market. The constant fuel supply constraints, coupled with mandatory widely used around the sony vgp-bps10/s world related to energy efficiency standards promulgated one after another, are driving the demand for low-power energy-saving new technologies continue to grow. power management IC will continue to use innovative energy-saving ways to deal with these major challenges of energy efficiency, thereby enhancing energy efficiency and space efficiency. “He also pointed out that abandoning the single-phase AC / DC motors and variable speed motor switch, can save up to 40% of energy, while the induction motor into permanent magnet motor, can improve the efficiency of up to 5%. Can be seen that the contribution of power management for energy-saving technology is built on the basis of continual innovation sony vgp-bps10a.

According to market research firm ICInsights new release of the 2008 McClean Report (TheMcCleanReport), IC suppliers rising degree of specialization, have led to abrupt change in the semiconductor industry cycle. Historically, the semiconductor industry, there is a huge cycle, with eight very obvious stage.

IC industry cycle fujifilm np-120

While the shift from one phase to another phase of the usually unpredictable, there are still a number of key factors (such as global GDP growth, electronic system sales growth, IC unit shipment, the semiconductor industry capital spending trends, etc. and so on) can show whether the bottom, or a cycle peak fujifilm np-140.

However, ICInsights that since 2004, these “traditional” industry cycle model has new features. The previous single IC industry cycle, usually about the same time, affecting all of the IC product areas, though some may be different. Now the single-cycle seems to have developed into at least four sub-cycles (ie logic / foundry, MPU, analog and DRAM / flash memory cycle). In addition, DRAM and Flash have their own cycles of change. Between such individual product life cycle independent of each other sony vgp-bps9/b , sony vgp-bps9/s, sometimes with the IC industry, the overall trend in the opposite.

IC industry sub-cycle sony vgp-bps9a

The semiconductor industry from a single large cycle evolved into four sub-cycles, One reason is that IC suppliers, specialization increased. In the past, many large IC suppliers (such as Motorola, Texas Instruments, NEC, etc.) involved in DRAM, logic, analog and MPU and many other product areas. However, most vendors have turned to, or are turning to a more specific product line. Therefore, capital investment and R & D investment are more focused on specific areas of IC products. In addition, each IC product areas (ie, foundry, DRAM, MPU, etc.) are now faced its own unique competitive environment, not necessarily to compete with other product sony vgp-bps9a/b areas as environment.

DRAM market is a good example of sub-cycles. In 2006, DRAM market grew 32%, DRAM average selling price (ASP) rose 13%. In contrast, the overall IC market growth in the year 9%, IC average selling prices fell 8%. In addition, in 2006 the area of DRAM capital spending surge 44% of the overall semiconductor industry capital spending increase (18%) as a whole. Driven by investment in 2007, average selling price of DRAM dropped 39%, while the overall IC industry average selling sony vgp-bpl9 prices fell only 6%.

ICInsights that these sub-cycles will continue to weaken the overall IC industry cycle of intensity change. While in 2006-2007 the area of DRAM and flash memory capital spending significant increase in lack of reason, it is expected that the future of the professional supplier of IC capital spending would be more reasonable to continue to support the sub-cycle mode and ease the overall IC industry cycle fluctuations.

However, ICInsights that each sony vgp-bps10 , sony vgp-bps10/b IC product sub-cycle is still possible at some stage with the transfer, resulting in very weak IC industry growth (decline by 10% or more) or very strong IC industry growth (an increase of 20% or higher).

TV remote control inside the cell bed, fast asleep suddenly frightened by an explosion victim

Core Tip: Recently, the Guangzhou Chongwe appeared in a strange house, he suddenly exploded on the bed of the TV remote control. Chongwe sleeping wife, scared almost jumped out of bed. It is unclear, in the end is the remote control circuit problem or the battery itself, the quality problems caused by the explosion casio np-30.

Batteries such as firecrackers explode extinguishers, blow out the right side of the battery.

Mobile phone battery exploded wounding the news casio np-40 hit the newspapers from time to time, but the TV remote’s battery explosion you heard about Yao? Recently, Panyu District, Guangzhou residential Xiaogu Wei Sui Ishimura’s Chongwe home appeared in such strange things, the battery core is also completely blow out, but fortunately no one was injured in the incident.

The reporter was later reported to the Chongwe home,  I saw casio np-l7 a bed piled with a few scattered broken parts, the entire remote control has been “bombed” was torn apart: before and after the cover completely separate, in the middle of the circuit boards have been stripped out, next to the 2 7 batteries, there has been a deep-fried or bad, only cylindrical battery cells inside the metal shell and core.

, “To keep us scared!” Chongwe recall time of the incident scene, still a lingering fear. According to him, at about 10 pm the day before yesterday, he was half-lying on bed watching television, television remote control placed beside him, while his wife had been fast asleep in bed on one side of the wall. Watched for came beside him sony vgp-bps9 on the “black” is heard. “It’s like put firecrackers in the side.” “His wife was in bed, almost jumped out of bed, has been asking ‘how, and how it?’” Chongwe often billed as the original remote control has been divided. Chongwe said that he Huiguo Shen careful observation, the original remote control, battery pack inside an explosion occurred on the 7th battery, battery core is also blown out.

“Fortunately at that time did not take in your hand, and no injuries to people.” Fortunately, an explosion at the same time without wounding Chongwe introduction, the two AAA batteries that had bought from a nearby market canteen, and used less than two months, according to the battery on the logo, it is necessary to expire until August 2008. In the end is the remote control circuit problem or the battery itself, the quality problems caused by the explosion sony vgp-bps9/b , sony vgp-bps9/s, he said he do not know.

The first four national DME dell D5318 buses and 10 cell – capacitor hybrid bus this morning at the bus company’s 147 road and FAW Volkswagen Group of 825 road traffic on the bus lines put into demonstration operation.

With the continuous improvement of urban environmental protection requirements on the bus energy consumption and pollution emissions rising demands. Bus Transportation Group, FAW and Volkswagen had assumed a new technology with energy-saving environmental protection DME bus and dell GD761 battery – capacitor hybrid bus research, and line the road for a test run, in order to officially put into operation and accumulated practical experience.

According to reports, a formal vote of DME dell GK479 bus transportation in the compartment at the top of the “tank” filled with dimethyl ether in, you can guarantee that the vehicles travel about 300 kilometers a day, down the middle of operation without refilling; while the battery – capacitor hybrid power bus to achieve a “charging at night during the day to run”, has both the tram environmental protection, energy-saving features, they do not need to lay cables along the route, and 100 kilometers electricity consumption was 86.8 kWh per day tariff is only the same length fuel buses about 15% of the cost of the vehicles slow down or part of the operating conditions may be driving the vehicle the extra energy from the capacitor be achieved against dell inspiron 1720 battery charging energy recovery.

If the single-cell Li-ion and lithium polymer panasonic cgr-d210 battery over charging, over its float voltage (typically about 4.2V), the potential dangers that may occur. Thus, portable designers currently seek redundant safety mechanisms to ensure the safety of the battery, but also meet the relevant standards. bq24314 monitors the battery voltage to provide a second layer of protection. If the detected voltage is too large, it will interrupt input charging power supply.

High-current input over-current protection

If a direct connection from the input to the system bus voltage, panasonic cgr-d110 battery charger integrated power management devices may be entered on the over-current situation. In many cases there is no suitable protection mechanism used to restrict input from the adapter to the system is too large currents. Programmable bq24314 can sensing and regulating its integrated MOSFET, ensure that the system does not inhalation of excessive current, thus limiting the inflow of a large input current.

bq24314 and bq24316 key technical characteristics of

Provide three kinds of variables Protection: Input over-voltage, input over-current and panasonic cga-du21 battery over-voltage;

30V maximum input voltage;

Integrated power FET and current sensor supports up to 1.5A Input Current;

Response time of less than 1μs effectively prevent the importation of over-voltage;

Input over-voltage protection threshold of 5.85V (bq24314) or 6.8V (bq24316);

For the errors caused by the current transients triggered by higher immunity;

Status indication – fault condition;

Thermal Shutdown dell inspiron 1526 battery

Pricing and Availability

bq24314 and the bq24316 is now in volume production is available through TI and its authorized distributors to order. Both devices are micro and small 2 mm × 2 Haomi 8-pin small-outline no-lead (SON) package.

TI plans to launch the fourth quarter of 2007, a new charger front-end protection IC – bq24300. Its fixed input over-current protection threshold of 300mA, input over-voltage protection threshold is 10.5V, Bluetooth headset can meet the needs of low-power applications. bq24300 can serve as a linear regulator to use, for input over-voltage to reach the threshold voltage, it can manage up to 5.5V output voltage (bq24304 to 4.5V). In addition, bq24300 circuit also through the optional external P-Channel MOSFET, to prevent failures caused by the dell inspiron 1545 battery adapter, reverse polarity (reverse polarity).

Input overvoltage Dell Battery condition is caused by steady-state or transient voltage events, such as hot-plug charging adapter, use of non-regulated or incorrect adapter, or load transients. The above will increase the voltage or the equipment is in peak voltage, this may cause damage to the host system. bq24314 can detect excessive pressure levels, if necessary, disconnect the input with the charger and efficient to protect the equipment. The device supports 5.85V input over-voltage threshold. Another version of the circuit can be bq24316 supports up to 6.8V overvoltage threshold.

TI battery charger front-end ICs released to improve cell phone dell inspiron 1520 battery charging system security

Texas Instruments Inc. (TI) announced the launch of battery charger front-end ICs, these products can significantly improve the cell phone or other portable electronic devices charging protection. The 2 mm × 2 mm safety circuits protect the system from input over-voltage, over-current and dell inspiron 1521 battery over-voltage, in addressing the power peak due to charging or using defective or incorrect wall adapter plug arising problem.

As the latest TI Integrated FET circuit bq243xx series charger front-end of the first product, bq24314 circuit failure in the charger for lithium-ion dell inspiron 1525 battery can provide additional protection. Protection IC can fault condition reported to the host processor, such as the TI DaVinci technology-based new DM355 processor or OMAP 3 family of applications processors, so that the host processor will be able to take additional corrective action.

General Motors Vice Chairman: Company Dell Latitude D620 Battery electric vehicle batteries overheating problem would not exist

General Motors Corporation (General Motors Corp) Vice-Chairman Lutz (Bob Lutz), said General Motors for its electric vehicle battery technology, “hundred percent confident” will not encounter Toyota Motor Corporation (Toyota Motor Corp) produced by cells overheating.

Lutz said that if this type of Dell Latitude D820 Battery technology development can be successful, not sure whether it’s electric vehicles than Toyota, there is a great advantage in terms of time.

Lutz Motor Show in Frankfurt, said before a news conference, if such cells can be a good way to work, each auto manufacturer will use it.

Toyota hybrid cars for its next-generation lithium-ion sony vgp-bpl9 battery process has been slowed down due to overheating problems.

GM is currently being used in lithium batteries use different ingredients.

Lutz said the sony vgp-bps9 company is very confident that such batteries do not output overheating.

Lutz also said GM will be in a number of months or a year with better electric car beat Toyota in the market, it is expected that such advantages do not last long.

Lutz said, “Toyota will also have this technology, every car manufacturer will have this sony vgp-bpl8 technology.”

From Laptop battery 10 years ago, “take-ism,” started to realize independent innovation, to become the industry leader in battery production, the completion of the Bank of the battery is how “broken cocoon turning into a butterfly,” Evolution of? Bank of China (Ningbo) Company XIE Hong-wei, deputy chief engineer described to reporters a little-known story.

The last century, 90 years, the Bank of China to rely on Dell Latitude D800 Battery production line imported from Japan. At that time the Japanese side that “at least five years, China could not grasp the alkaline batteries advanced production technology.” Thus, the Bank of the battery to the transfer of equipment, the Japanese side promised a written promise: not only the production equipment to provide this All technical support, but also willing to develop the latest technology within three years without charge.

Equipment introduced since 1994, after the Bank of the battery technology will be the backbone of the organization XIE Hong-wei, and a group of the introduction of new technology to digest, absorb, and in 1996 set up a research center, drawing on advanced technology Dell Latitude D830 Battery from abroad, based on the independent innovation.

However, as the “Deer” batteries began to sell abroad, Japan’s attitude has begun to have a subtle change: no longer give us the output of new technologies; the original sale of equipment not come maintenance; not even close to the instructor right XIE Hong-wei is also the defensive.

In 1998, XIE Hong-wei by the company selected to go to Japan to conduct a six-month training study. From the plane to Japan since XIE Hong-wei will never feel the “cold shoulder”: training greatly diminished, the latest technology, kept secret …Dell inspiron 1545 battery … So, XIE Hong-wei more to rely on self-study.

Through the six months to study hard, XIE Hong-wei is not only mastered a set of advanced production processes and technologies, also developed nylon ring and steel process has made a technical breakthrough. After returning home, the company will XIE Hong-wei’s training results immediately applied to production, so that product performance has risen considerably.

By the end of 1999, Bank of China (Ningbo) Company not only in the first province to achieve a mercury-free alkaline dell vostro 1400 battery self-production, five years ahead of schedule up to the national ministries and commissions on the restriction of 9 mercury battery requirements, but also realize the localization of raw materials, battery performance, but more than Japan.

By the end of 2003, Bank of self-developed ZR6 batteries mercury-free alkaline zinc-nickel battery production line adopted by experts, China alkaline battery production line of the situation of the long-term dependence on imports has been broken in one fell swoop. Today, the company’s hp F2024B battery production line more than half of their own developed.